Category Archives: Uncategorized

Why CAD/CAM Post Processors are Old School and Obsolete [Stop the CAD/CAM Post Processor Madness]

There is no denying that going from a CAD drawing through CAM and then to the output of the final G code program … a post processor is an essential tool. And if you wish to output that G code to multiple machines and controls … then you must need multiple post processors. Right ???? And if your shop has multiple machines/controls … I’ll need multiple posts for all the machines. Right ????

Well … if you still want to think and believe old school … then yes, that’s right. If you looking for a better way … a less expensive way … a  more flexible way … a way that also has other UP sides … then the answer is NO. And we are here to tell you why and show how.

Here’s a hint … G code conversion using KipwareXC® and Kipware® CNC XChange.

Conversion

Post Processors are OLD SCHOOL …
Re-Posting

Post processors … taking for granted that you are even using a CAD/CAM system … are really only good once … at program creation. After that … they really are useless. Running back to re-post for other machines/controls is time consuming and inefficient … and that is taking for granted that you even have the CAD file. If the program has been on the shop floor for a while … chances are good edits have been made … speeds, feeds, toolpaths, etc.. Re-posting eliminates all that and basically makes you start at program-prove out stage again … not efficient. What if you could simply take that proven G code and have a G code conversion app auto-convert that G code to any other format you would require? That’s NEW SCHOOL … that’s KipwareXC® and Kipware® CNC XChange.

Post Processors are OLD SCHOOL …
Multiple Posts for Multiple Machines

Of course you must buy multiple posts for the multiple types of machine / controls on your floor … RIGHT??? Or have you ever thought about not buying other machines/ controls because it would mean all the “getting a new post” headaches and costs. OLD SCHOOL THINKING !!! What if you could simply output your code using the same proven post you are already using … and have a G code conversion app auto-convert that G code to any other format you would require? That’s NEW SCHOOL … that’s KipwareXC® and Kipware® CNC XChange.

Beyond Post Processors …
Only Program Machine/Control’s You Know

Let’s take a look at programming beyond the CAD/CAM system … like manual programming. The OLD SCHOOL thinking says that the programmer must be familiar with the machine and control he is programming. New school thinking says … not any more. What if I am familiar with Fanuc programming and have to program a Fagor control. What if I could write my program in Fanuc format … and run it through a converter that would auto convert it to Fagor format. That’s NEW SCHOOL … that’s KipwareXC® and Kipware® CNC XChange.

Need a better look? … how about a video. The video below illustrates how KipwareXC® can be used instead of a post processor to auto-convert a modern day Fanuc program into a yesterday’s format required for a GE1050 control.

The video and points outlined in this article are simply a starting point. I am sure you and your shop have similar scenarios in which the above points might apply in some way. If so … we invite you to contact us at any of the options below … and let us show you how NEW SCHOOL thinking with KipwareXC® and Kipware® CNC XChange can eliminate the multiple forms of “control incompatibility” from your shop floor.

Our Website :
http://www.kentechinc.com/KipwareConversionSoftware.html

Request a Live, OnLine Demonstration :
http://www.kentechinc.com/Webex_Request.html

Kenney Skonieczny – President
Kentech Inc.

Welcome to The CNC Machinist Blog !!

canstockphoto9802408

Thanks so much for your visit and welcome to the NEW KentechInc.biz … now to be known as The CNC Machinists Blog.

As time goes on we’ll be digging into our 25+ years of machinist … metalworking … shop management … chipmaking … engineering … and various CNC related experiences to post what we feel is worthwhile commentary and information on all things CNC … machine shop … and metalworking.

Please check back often …  we will try not to disappoint.

BTW … for all things CNC and Machine Shop Software … please check out our complete line of business software … conversational CAM software … G code conversion software and more at our website … www.KentechInc.com

Thanks,

Kenney Skonieczny

President — Kentech Inc.