Tag Archives: vectric

Building the X-CARVE for KÄRV Woodworking

As mentioned in our previous post … we are in the process of creating and setting up a sister company to Kentech Inc. … called KÄRV.

KÄRV will allow us to take our metalworking talents … along with the Kipware® software we designed and built at Kentech … to the woodworking stage as we create custom, handmade furniture and unique wood carvings and introduce them to the KÄRV product line.

We will be using our quoting and estimating software to help determine pricing … and our conversational CNC programming software to help create G code programs for our X-CARVE CNC router.

And all along the way … we will be blogging about it all here. So we invite you to visit often and see Kipware® in action … and maybe even discover some KÄRV products that you might like to own !!

We began back on October 22 by registering KÄRV as a business in our city … started setting up our workshop … ordered our X-CARVE … and now we have completed the build and test cut for the X-CARVE.


We waited for a little over (3) weeks to receive the X-CARVE … which seemed like an eternity … after we placed the order. That was a little disappointing. Of course the X-CARVE came un-assembled … and in many many pieces. But the good new was the step-by-step instructions available from INVENTABLES … the creators of the X-CARVE were just fabulous. Very in-depth … easy to follow … and coupled with some patience we went from box to completed assembly in about 24 total hours. One not-so-nice event was that while we were able to build the complete machine … the controller was back-ordered. So the completed machine sat and waited for almost 1 week while we waited for the controller. Finally we had to make a few calls to INVENTABLES to gently nudge them and we received the controller … and set out to test carve.


We decided to program some simple lettering for our test cut … and make a little sign for the workshop. We used Vectric VCARVE software which we bought from INVENTABLES when we purchased our X-CARVE. The software appears to be quite powerful and it was real easy to create our desired toolpath.


We cut the letters reversed … leaving .010 of material on the back edge just to hold everything together. Then we glued the letters to a backing piece of wood … turned the whole assemble over and sanded off the .010 of material to reveal the letters. Not bad for a first sample.

So now we are ready to move onto bigger and better things !!
Stay tuned … or visit us at www.KarvWoodworking.com

Kenney Skonieczny – President
Kentech Inc.